Main Features
1. Because the sensors have potential direction, please pay attention on the installation location.
2. Do not use the sensors where temperature is higher than rated, in order to ensure reliability and long service life.
3. Do not use the sensors in a vacuum zone or hazardous areas.
4. Do not use in a steam zone, this area of the atmosphere produce uneven temperature gradient will lead to measurement error.
5. The products should not be used or stored in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Store the products in the room where is normal temperature and humidity, and avoid the sunlight, sudden changes in temperature and humidity. It may cause of failure or malfunction in such conditions if it was stored in bad environment.
Quality assurance:
1. Vinner is equiped with world advanced computer driving production lines
2. Whole set of pure water processor line featured with RO anti-saturation and advanced testing devices
3. Manufactured in Class 100,000 Cleanroom.
Packing&Shipping
Dongguan city lidit Electronics Co. Ltd is located in Liaobu town Dongguan City Guangdong province. Development and production of piezoelectric ultrasonic device.Products are mainly measured by the type of piezoelectric chip, precision piezoelectric actuator, ultrasonic sensor, power ultrasonic transducer, medical ultrasonic transducer, ultrasonic probe and other ultrasonic piezoelectric ultrasonic device.Products are widely used in ultrasonic cleaning, broken ink (ink jet printer crystal), extraction, chemical catalysis,measurement, air humidifying, ultrasonic scaling, medical treatment, physical therapy and health care, beauty, and washing areas.
Company in the community to support the strong support of the company and the company's efforts, the company has become a well-known professional manufacturers of ultrasound industry. The adoption of domestic and foreign excellent raw materials, union of advanced processing technology, manufacturing technology, professional R & D team and technical support and service capability, in the field of ultrasonic application, has now become domestic and foreign many well-known by the user's main suppliers. Products are exported to the Americas, Europe, Australia, the Middle East and Southeast Asia and other places
FAQ
1. The piezoelectric ceramic can give a strong and stable output.
2. High efficiency, high mechanical quality factor, obtaining high electric-acoustic conversion efficiency work at the resonance
frequency points.
3. Large amplitude: optimization design by computer , vibration speed ratio is high .
4. Large power,Under the action of prestress screws, the energy of the piezoelectric ceramic to get maximum play;
5. Good heat resistance, small harmonic impedance, low calorific value, using temperature range is wide.